Overview: GEPRC CineBot25 Cinewhoop – Virtually Excellent however Nonetheless Has a Few Points

0
0


I’ve examined many cinewhoops prior to now few years, and the GEPRC CineBot25 is probably my present favourite 2.5″ cinewhoop. A lot thought has gone into its design, and the eye to element is solely superb. Whereas it’s not good and has a number of annoying points, as you’ll uncover on this assessment, these quirks don’t detract from its spectacular efficiency.

<script type=”text/javascript”> atOptions = { ‘key’ : ‘015c8be4e71a4865c4e9bcc7727c80de’, ‘format’ : ‘iframe’, ‘height’ : 60, ‘width’ : 468, ‘params’ : {} }; document.write(‘<scr’ + ‘ipt type=”text/javascript” src=”//animosityknockedgorgeous.com/015c8be4e71a4865c4e9bcc7727c80de/invoke.js”></scr’ + ‘ipt>’); </script><\/p>

Among the hyperlinks on this web page are affiliate hyperlinks. I obtain a fee (at no additional price to you) when you make a purchase order after clicking on one in every of these affiliate hyperlinks. This helps help the free content material for the group on this web site. Please learn our Affiliate Hyperlink Coverage for extra data.

Study Cinewhoops: https://oscarliang.com/cinewhoop/

The place to Purchase?

You will get the GEPRC CineBot25 from these distributors:

There are two variations: Normal (non-S) and Sport (S). The S model options bigger 1505 4300KV motors, that are an improve from the 1404 motors in the usual model, delivering extra energy and stability.

Geprc Cinebot25 S Cinewhoop Unbox Accessories Parts

Batteries will not be included, my suggestions are the Lava 4S 850mAh:

Get some spare propellers when you plan to crash 🙂

Specs

Geprc Cinebot25 S Cinewhoop

  • Body: GEP-CT25 Gray
  • Wheelbase: 115mm
  • Flight Controller (FC): TAKER G4 45A AIO
    • MCU: STM32G473CEU6
    • Gyro: ICM 42688-P
    • Firmware: TAKERG4AIO
  • Motor: SPEEDX2 1505 4300KV
  • ESC: BLHeli 32-bit 45A
  • Propellers: HQProp DT63mm x4
  • Connector: XT30
  • Official Weight:
    • Normal PNP Model: 138g ±1g
    • Sport PNP Model: 145g ±1g
  • Really useful Battery: 4S 650mAh – 850mAh LiPo

Nearer Have a look at the Construct High quality

The GEPRC CineBot25 S stands out with a sturdy, glossy design. The digital camera, motor, and flight controller are mounted on the highest plate, which is created from smooth-layered carbon fiber, providing a light-weight but sturdy really feel.

Geprc Cinebot25 S Cinewhoop Motor Propeller

Under the highest plate is a detachable plastic housing for the VTX and receiver. The digital elements are nicely protected, however the enclosed design would possibly compromise cooling in sizzling environments.

Geprc Cinebot25 S Cinewhoop Side

The FPV digital camera is mounted inside a devoted soft-mounted cover that limits excessive digital camera angles however presents sufficient safety.

Geprc Cinebot25 S Cinewhoop Camera Mount

An exterior HD digital camera could be hard-mounted utilizing the offered adapter, however it’s greatest to keep away from including additional weight like a unadorned GoPro. Whereas it could work for sluggish and regular indoor pictures, it compromises outside agility and velocity. The DJI O3 system already gives wonderful picture high quality anyway.

Geprc Cinebot25 S Cinewhoop Antenna Mount

Two battery straps of various lengths are included: an extended one for 4S 750mAh and 850mAh batteries, and a shorter one for smaller 4S 650mAh batteries. The drone weighs round 153 grams with out the battery, digital camera, and VTX, which is sort of 10 grams heavier than the BetaFPV Pavo25 V2. Nonetheless, this added weight is comprehensible given the additional plastic used for defense.

With the DJI O3 system put in and a 4S 850mAh LiPo, the full weight is round 290 grams.

Geprc Cinebot25 S Cinewhoop Bottom

Listed here are some aspect by aspect comparisons to the BetaFPV Pavo25 V2:

Geprc Cinebot25 S Cinewhoop Compare Pavo25

Geprc Cinebot25 S Cinewhoop Compare Pavo25 Frame Side

Geprc Cinebot25 S Cinewhoop Compare Pavo25 Camera Mount

DJI O3 Setup

Though the CineBot25 helps numerous FPV techniques, together with analog and Runcam Hyperlink/Wasp, the soft-mounted digital camera platform is a transparent indication that it’s particularly designed for the DJI O3 system. Different FPV cameras aren’t as inclined to jello and vibration because the O3, making extra mushy mounting vital. I actually like GEPRC’s implementation utilizing silicone balls as it really works exceptionally nicely.

Geprc Cinebot25 S Cinewhoop Installing Dji O3 Air Unit Camera

Nonetheless, the digital camera cover can simply pop off throughout crashes, and it’s difficult to reattach as a result of how tiny and mushy these silicone balls are. They’re additionally fairly fragile, metallic instruments can simply pierce by means of them. Whereas GEPRC gives some instruments to assist with this, it’s a problem remembering to deliver them alongside. Zip ties can safe them however will scale back the effectiveness of the mushy mounting.

Geprc Cinebot25 S Cinewhoop Camera Mount Detached Crashes Anti Vibration Silicone Balls

Person Pleasant Design

The most effective design elements of the CineBot25 is how simple it’s to entry the flight controller and DJI O3 USB port. There’s a USB-C port on the rear of the drone, linked to the flight controller by way of an extension board.

Geprc Cinebot25 S Cinewhoop Flight Controller Fc Usb C Port Rear

You possibly can entry the DJI O3’s SD card slot and USB-C port by means of a cutout within the plastic housing, and when not in use, you’ll be able to put the rubber cowl again on to guard it from filth and water.

Geprc Cinebot25 S Cinewhoop Silicone Rubber Cover Dji O3 Usb Sd Card

Geprc Cinebot25 S Cinewhoop Installing Dji O3 Air Unit Access Sd Card Usb C Cover

There’s no have to disassemble the drone or use an adapter to entry these USB ports, making it extremely handy. You possibly can inform how a lot thought has gone into the design.

Nonetheless, one small difficulty is that I couldn’t join or flash the ESC by way of the USB port on the FC extension board. I had to make use of the precise USB port on the FC, which requires disassembling the drone. They might have used a USB-C extension cable like Speedybee did within the Bee35 to take care of compatibility. However it’s not a giant deal because you don’t sometimes have to flash your ESC.

Dissembling the drone for restore is straightforward too.

Geprc Cinebot25 S Cinewhoop Tear Down Take Apart Dissemble

Right here’s an in depth up shot of the flight controller.

Geprc Cinebot25 S Cinewhoop Flight Controller Fc

Flight Efficiency

The CineBot25 S is solely among the best flying 2.5-inch cinewhoops I’ve examined—very steady, well-tuned, and with loads of energy for freestyle.

It’s additionally very environment friendly. I examined mine with LAVA 4S 850mAh LiHV batteries from BetaFPV and acquired round 5 to six minutes of flight time (a mixture of aggressive flying and cruising), which could be very spectacular.

The DJI O3 VTX system, paired with a soft-mounted digital camera, gives crisp FPV footage with none jello.

Learn how to Setup

Though initially I used to be impressed by the CineBot25’s design, the setup course of took a bit extra time and effort than anticipated.

O3 Set up

Very first thing is to put in the DJI O3 system contained in the plastic housing. Sadly, there’s no instruction offered, so that you’ll want to make use of your creativeness. I have to admit it wasn’t simple in any respect as I spent over virtually an hour looking for one of the simplest ways to mount the O3. Ultimately I made a decision to not use the offered heatsink and simply mounted the O3 immediately contained in the plastic housing.

Geprc Cinebot25 S Cinewhoop Installing Dji O3 Air Unit

Geprc Cinebot25 S Cinewhoop Installing Dji O3 Air Unit Connect Antenna Extension

Geprc Cinebot25 S Cinewhoop Installing Dji O3 Air Unit Finished

Additionally, not like BetaFPV’s cinewhoops, GEPRC doesn’t present any cable for the O3, however you should utilize the unique cable, so it’s not an enormous difficulty when you nonetheless have it. Additionally there’s no screws offered for mounting the digital camera within the cover – you will have M2 3mm.

Lastly, be sure that to tape the UFL extension to keep away from electrical shorts! It they touches the uncovered battery solder pads might fry your O3!

Binding Receiver

Right here I encountered one other difficulty – the receiver doesn’t get energy from the USB port, you should plug in a battery.

I used to be going to flash the newest ExpressLRS firmware to the receiver together with my binding phrase, so I wanted to seek out out what goal it makes use of. That was achieved by going into WiFi mode (by plugging in battery and wait 60 seconds) and checking on the Internet UI .

Receiver goal is: Generic ESP8285 PA 2.4Ghz RX, it comes with 3.3.1 firmware.

Nonetheless, I couldn’t discover this goal within the newest ExpressLRS Configurator, so I didn’t replace the firmware however set the binding phrase within the Internet UI.

Betaflight Configuration

Organising Betaflight for maiden flight was simple.

The CineBot25 comes with Betaflight 4.5.0. The flight controller goal is TAKERG4AIO. You could find the unique CLI diff right here: https://intofpv.com/t-cli-dump-for-the-geprc-cinebot25-s.

  • In Preset tab, apply ExpressLRS Preset primarily based on the packet charge of your selection.
  • In PID Tuning tab, set your personal charges.
  • In Modes tab, assign change for arming.
  • In OSD tab, configure OSD components. Though HD was chosen, the canvas was caught in analog measurement. I needed to de-select and choose HD once more to get the bigger HD OSD canvas.

Conclusion

I’m blown away by the GEPRC CineBot25 S—it has among the best design available on the market, and the flight efficiency is superb! Whereas there are a number of hurdles to beat throughout setup, these will not be deal breakers. In the event you’re in search of a 2.5-inch cinewhoop for the DJI O3 system, that is the one I’d advocate proper now.

Get the GepRC Cinebot25 from these distributors:

Get some Lava 4S 850mAh batteries:

Get some spare propellers:

Geprc Cinebot25 S Cinewhoop Front

Nonetheless, this drone isn’t designed for sub-250 grams in thoughts. You would most likely push it underneath 250 grams by going analog or utilizing a smaller battery, however you’d be higher off with a 2-inch quad as a substitute (try the Pavo20). I additionally don’t advocate utilizing a GoPro on the CineBot25; it kills its flight efficiency and flight time. If you wish to use a GoPro, go for a 3-inch or 3.5-inch quad.

For cinematic FPV flying and dynamic pictures utilizing the O3, the CineBot25 S presents incredible design and efficiency at a good worth level. With its highly effective motors and DJI O3 compatibility, it stands out as a robust contender within the cinewhoop market.

LEAVE A REPLY

Please enter your comment!
Please enter your name here